Higher-Capacity Passenger Lift Planning

1250 kg / 16 Person Passenger Lift in Bangladesh

A 1250 kg, 16 person passenger lift is a higher-capacity option for buildings with heavier passenger demand. Final cabin, shaft, door, speed, power and equipment details still depend on the selected lift system and site.

1250 kg Assigned capacity class
16 person Passenger buying intent
Site-specific Final technical dimensions
Quick answer

This page covers the 1250 kg / 16 person passenger-lift class. It can be considered for larger apartment, office, hotel and commercial projects where passenger demand is higher, but traffic, accessibility, shaft space, stops and the selected elevator model should be checked before approval.

Sixteen adults inside a passenger elevator showing people-scale capacity
People-scale capacity
16 person passenger class

Plan for the busiest journey, not the quietest one

Sixteen people is the assigned passenger class for this page, but day-to-day use may include bags, visitors, staff, elderly users and mobility aids.

If the cabin is expected to run full regularly, traffic planning matters as much as the nominal capacity.

Where 1250 kg may fit

A 16 person lift makes sense only when the building needs it

Choosing more capacity than the project needs can increase space and equipment requirements. Choosing too little can create queues and poor daily service.

Apartment & mixed-use buildings

Review the number of units, peak arrival periods, visitor traffic and whether the elevator also needs to accommodate bulky everyday movement.

Office & commercial use

Look at morning, lunch and closing peaks. Higher occupancy can make a larger cabin useful, but traffic calculations should guide the decision.

Hotels & public-facing buildings

Guests, luggage and staff movement can increase practical space demand even when passenger numbers appear manageable.

Future occupancy

If the building may become busier, compare the next capacity before civil dimensions are permanently fixed.

The sitemap assigns this page to 1250 kg / 16-person commercial intent. Informational dimension research belongs on the Passenger Lift Size & Dimension Guide, not here.
Elegant stainless steel 16 person passenger lift cabin interior
Cabin usability

A larger cabin still needs practical door and control planning

Finishes attract attention, but the daily experience depends on usable floor space, clear doorway, landing flow, controls, ventilation and maintenance access.

  • Clear opening: Match the door arrangement to expected passenger flow and the landing layout.
  • Usable floor area: Confirm the actual internal dimensions from the selected model drawing.
  • Accessibility: Review wheelchair and mobility-aid needs separately from the nominal passenger count.
  • Finish and durability: Choose materials that suit the building's traffic and maintenance plan.
Technical acceptance

What must be confirmed before the shaft is finalized?

The 1250 kg rating does not create one universal lift drawing. Different products can use different technical layouts.

  1. Actual shaft dimensionsMeasure the clear width and depth and note columns, beams, walls and construction tolerance.
  2. Cabin and door drawingConfirm internal dimensions, clear opening and landing entrances for the chosen model.
  3. Pit and overheadUse the approved manufacturer drawing. Do not copy a generic 1250 kg dimension from another product.
  4. Drive and machine arrangementMRL, machine-room and other configurations can require different space and access.
  5. Power and controlsFinal supply, protection, earthing and backup requirements should match the selected equipment.
  6. Maintenance and rescue accessPlan safe service access and emergency procedures before the installation is handed over.

Why not publish one fixed speed or shaft size here?

Current 1250 kg / 16-person products are sold with different speeds and system layouts. Final specifications should come from the selected model and building requirements.

Read the passenger lift dimension guide →
Technicians installing and commissioning a 16 person passenger elevator
Installation readiness

Higher capacity makes site coordination more important

The shaft, structural openings, electrical work and equipment route should match the approved elevator package before installation begins.

01
Survey the building

Confirm shaft dimensions, levels, landing access and the route for bringing equipment to site.

02
Approve the technical package

Finalize the capacity, doors, cabin, drive system, stops and project drawings.

03
Prepare civil and electrical work

Complete the required structural, waterproofing, opening and power work to the approved drawing.

04
Install, test and commission

Complete adjustment and operating checks before the lift enters normal passenger service.

See the lift installation process in Bangladesh →

Price and quotation

What affects 1250 kg lift price in Bangladesh?

Current Bangladesh listings show different prices for 1250 kg / 16-person lifts. A useful quotation should therefore describe the full equipment and project scope instead of relying on a single headline figure.

Stops and travelMore stops, travel and landing doors change equipment and installation scope.
Drive and controllerMotor, control system and operating configuration affect the package.
Cabin and doorsDoor type, cabin finish and entrance arrangement influence project cost.
Shaft and civil workNew-build and retrofit sites can require very different preparation.
Import costsFreight, duties/taxes, exchange rate and availability can change Bangladesh pricing.
Installation and supportClarify commissioning, warranty terms, maintenance and spare-parts scope in writing.

For a useful quotation, send the project location, building use, floors/stops, shaft size, expected passenger traffic and any available drawings or clear site photos.

Buyer reviewing 1250 kg 16 person passenger lift options with a consultant
Bangladesh project checks

Plan the lift for the building, climate and service path

Bangladesh projects should account for shaft condition, drainage and water protection, heat, dust, electrical quality, traffic and maintenance access. Final structural, fire-safety, accessibility and building-code requirements should be checked for the actual project by the relevant architect, engineer and lift specialist.

Final shaft, pit, overhead, structural loads, power and door requirements should come from the approved technical drawing for the selected elevator.

  • Protect the pit and equipment areas from water ingress.
  • Coordinate structural openings and loads before ordering.
  • Confirm electrical protection, earthing and backup arrangements.
  • Leave safe access for installation and ongoing maintenance.
  • Review emergency operation and rescue arrangements before handover.
Nearby capacity choices

Compare the passenger class around 1250 kg

Buyer questions

1250 kg / 16 person passenger lift questions

Final technical requirements vary by manufacturer, model and building, so the answers below stay project-specific.

Is 1250 kg always a 16 person passenger lift?

This page covers the 1250 kg / 16-person class assigned in the website sitemap. Product labels can vary, so confirm the selected model's rated load and passenger classification before ordering.

What shaft size is needed for a 1250 kg passenger lift?

There is no single shaft size for every 1250 kg elevator. Cabin proportions, door arrangement, drive system, counterweight position, speed and manufacturer clearances can all change the required shaft.

Is a 16 person lift suitable for an apartment or office building?

It may be suitable where passenger demand justifies the larger capacity. The decision should consider occupancy, peak traffic, stops, accessibility, landing flow, available shaft space and future use.

How much does a 16 person passenger lift cost in Bangladesh?

There is no single project price. Current listings vary, and final cost can change with brand/model, stops, drive system, cabin and doors, shaft condition, civil/electrical work, import costs, installation and support scope.

What information is needed for a 16 person lift quotation?

Share the project location, building type, number of floors/stops, available shaft size, expected traffic and any drawings or clear site photos already available.

Next step

Confirm the capacity before the shaft and equipment are locked

Share the building details, available shaft and expected passenger demand. The technical team can then discuss whether the 16-person class or another passenger-lift capacity better fits the project.